Question

How do I use the AV in the Lighthouse Movement Room?


Answer

The new movement room in the lighthouse is equipped with a projector, speakers, an Apple TV to cast your device to and a portable wireless microphone. To connect your device to suit your needs, follow the instructions below.

To play audio:

  1. There is an audio input plate that you can directly plug into to play music from your iPhone, iPad, tablet or phone. The volume for this is simply controlled by turning the volume up or down on your device to the desired level.

 

To project media:

  1. Press the ON button and wait for the projector to power on and the screen to Descend.
  2. Connect your laptop using the HDMI to mini DP cable. 
  3. Press the Wallplate button.
  4. If playing audio use the ^ and v buttons to Increase or Decrease the Volume.
    1. If you need to stop displaying image or audio use the Mute button to stop projection. This will not stop any media on your computer.
  5. To turn the system off, press the Off button.

 

To connect using Airplay:

  1. Turn On the projector using the wall plate.
  2. Select the Airplay input.
  3. Follow instructions from following FAQ here.
  4. If playing audio use the ^ and v buttons to Increase or Decrease the Volume.
    1. If you need to stop displaying image or audio use the Mute button to stop projection. This will not stop any media on your computer.
  5. To turn the system off, press the Off button.

 

To use the wireless microphone:

  1. Retrieve microphone from the Lighthouse reception area.
  2. Attach the battery pack to your pants or belt and place the headset comfortably around the back of your ears.
  3. Turn the microphone On using the switch located on the battery pack. 
    1. Your voice will mix in with any audio playing through any of the other systems within the room. This cannot be adjusted. 
  4. Once you are done using the microphone, switch the pack Off and return it to reception.